IT House reported on May 7, according to the website of the State Administration for Market Regulation, recently, Beijing Benz Automobile Co., Ltd. and Mercedes-Benz (China) Automobile Sales Co., Ltd. According to the requirements of the Implementation Measures for the Regulations on Product Recall Management, the recall plan has been filed with the State Administration for Market Regulation, and the following vehicles will be recalled.
1. From May 31, 2022, recalled products with a production date between June 4, 2021 and July 8, 2021Selected C-Class, E-Class, EQC, GLC SUV vehicles, totaling 2365 units. A plastic part on the front seat back adjustment mechanism of some vehicles covered by this recall was manufactured using an incorrect material, causing the part to be damaged. The seat back may get stuck in a reclined position during adjustment. If one side of the seatback gets stuck during adjustment, it may cause the backrest to twist, reducing the seat’s ability to restrain the occupant. When a vehicle collides, it will increase the risk of injury to the occupants of the vehicle, posing a safety hazard.
IT Home understands that Beijing Benz Automobile Co., Ltd. will, through authorized dealers,Check the production time of the affected parts in the seat back adjustment mechanism for vehicles covered by the recall,ifDuring the affected time frame, the seat back frame will be replaced free of chargeto eliminate security risks.
2. From May 9, 2022,Recall of 1 imported E-Class vehicle with production date of March 8, 2021. The rear seat headrest guides may not be properly installed on vehicles within the scope of this recall, resulting in the headrest not being secured to the seat. In the event of a vehicle accident, the rear headrest may move or separate from the seat, increasing the risk of occupant injury and posing a safety hazard.
Mercedes-Benz (China) Automobile Sales Co., Ltd. will check the installation of the rear seat headrest guide sleeves of the vehicles covered by the recall through authorized Mercedes-Benz dealers, and replace them free of charge if they are not properly fixed. Headrest guide sleeve to eliminate safety hazards.
3. From May 9, 2022,Recall of 1 imported E-Class vehicle with production date of September 28, 2020. Due to the deviation in the production process of the vehicles within the scope of this recall, the electrical plug of the left acceleration collision sensor on the front beam is not fastened according to the installation specifications. If the vehicle is in a frontal collision, this may cause delayed activation or inactivation of the occupant restraint system, which reduces the restraint protection performance, increases the risk of occupant injury, and poses a safety hazard.
Mercedes-Benz (China) Automobile Sales Co., Ltd. will be authorized by Mercedes-Benz dealers,Check the electrical connector for the left-hand impact sensor on the front cross member of the affected vehicle. If the electrical plug is found to be loose or not tightened, tighten the plug to eliminate safety hazards.
.
[related_posts_by_tax taxonomies=”post_tag”]
The post Mercedes-Benz recalls some imported and domestic vehicles, involving EQC, GLC SUV and other models – yqqlm appeared first on Gamingsym.